Our ductile iron pipes DN 80-2000 mm are produced 6 meters long in complex with rubber gasket and with internal lining and external protective coatings according to All Union State Standard R (Russian national standard (ГОСТ), ISO 2531, EN 545, EN 598.
| Item | Scope of Supply |
|---|---|
| Size Range | DN 80 – DN 2000 |
| Class of pipes | C Class & K Class C20, C25, C30, C40, C50, C64, K7, K9, PP, PN20, PN 35 & FLCL |
| Joints | Push-on Socket and Spigot Joint, Self-anchored Restrained Joint (TJ & AJ Sit), Mechanical Restrained, Joints (MRJ) |
| Confirming Standards | ISO 2531, ISO 7186, BSEN 545, BSEN 598, AS/NZS 2280:2014 |
| Type of Linings | SRC, OPC, BFSC, HAC & Epoxy/Bituminous Seal Coat |
| Type of Coatings | Zn & Zn-AI Coatings as per International Standards |
| Finishing Layer | Blue/Red Epoxy or Black Bitumen |
| Special Coatings | External and Internal Polyurethane Coatings as per BS EN 15189 and BS EN 15655 |
Ductile Iron Fitting
Also We supply Ductile Iron Fittings. the fittings comply with the ISO 2531 standard and Russian ГОСТ 5525-88.
Internal lining
Cement-mortar lining is applied to the inner surface of the pipes according to the ISO 4179 requirements.
Outer coating
The protective coating of bituminous paint and zinc is applied on outside surface of fittings.
Pipe Bends
- Double Socket 90 Bend
- Double-Flanged Bend
- Socket – Straight End Bend
Outlets
- Double socket
- Socket-Spigot End
Tee Pipes
- All Socket Tee
- All Flanged Tee
- Double Socket Tee With Flanged Branch
Pipe Branches
- Flanged socket-joint pipe
- Flanged spigot end pipe
- Collar
Stand Pipes
- Socket Fire Support
- Flanged Fire Support
Service Kit
- Flanged Taper
- Socket Pipe
- Flanged – Socket Pipe
- Screw Socket Pipe
Чугунная труба ГОСТ 9583 и 5525
Сортамент составляют чугунные трубы ⌀ 80 – 2000 мм и длиной 6 м с внешним и внутренним покрытием.